SMS login may be done by entering a password for authentication, or by authentication via the Remote Login Service (RLS) login window (RLS authentication).

Settings can be changed to allow either only one of these methods or both of them.

SMS login window (password authentication)

Password authentication Password authentication

RLS login

MEMO:

If Default Authentication is selected as the device authentication method, 'RLS Authentication' is not selectable as SMS Login method. Also, if 'RLS

Authentication' is selected, the device authentication method (Default Authentication, SDL, SSO) cannot be changed.

In the SMS login window, enter the password for authentication. Only one password can be registered with SMS. The login procedures are as follows.

1) Access SMS from the browser of a PC on the same network as the MEAP device. The URL is as follows.

URL: http://<MEAP Device IP address>:8000/sms/

Ex.) http://172.16.188.240:8000/sms/

MEMO:

- The default password is "MeapSmsLogin." (The password is case-sensitive.)

- When you want to change the display original language, change in the box in the right of the screen. This setting is not affect by the setting of the language of the

device.

11-6

Authentication method

SSO-H/SSO(SDL also possible)

F-11-3

RLS login window (user name/ password authentication)

T-11-12

Authentication service name

SMS Installer Service(Password

Authentication)

SMS Installer Service(Remote Login

Service Authentication)