2. If the cable goes slack, fit the tie-wrap [2] so that it can sit on the left of the wire-saddle as shown in [3], and correct loosening of the cable.

3. Make a copy and check if the symptom is solved.

14.3.1.4.3 Measure against scratches made on Fixing Roller in circumferential direction: Lines appear in sub scanning

direction

imagePRESS C1 P / imagePRESS C1 / Color Image Reader-H1 / imagePRESS C1+ (Printer) / imagePRESS C1+

[ Inspected by Canon Inc. ]

Description

When lines appear because of scratches made on the fixing roller in the circumferential direction, suspect dirty stays and shafts around the roller. When

replacing the fixing roller with a new one to prevent this symptom, refer to the following field remedy.

Field Remedy

1. Prepare brand-new fixing roller, collecting roller, and heating roller.

2. Remove the fixing roller, collecting roller, and heating roller from the fixing assembly.

3. Remove the fixing belt assembly.

4. Clean the stay [A] and [B] with lint-free paper impregnated with alcohol.

Note: When cleaning, take care not to get injury from the sharp edge of the stays or legs of screws.

F-14-14

Chapter 14

0016-5604

14-11

Table of Contents