Canon imagePRESS C1 P Service Manual page 434

[1]
4) Remove the 5 screws [1].
5) Loosen the 3 processing link shafts [1].
Check to see that processing link shafts can be moved back and front.
6) Bring down the fixing feeding release lever [1] in the direction below.
[1]
7) Slide the fixing feeding unit [1].
When sliding the fixing feeding unit, be sure to completely disconnect the
connectors [1] in step 3.
[2]
F-7-115
[1]
F-7-116
[1]
F-7-117
F-7-118
8) Hold down the claw [1] and then slide the fixing feeding unit.
9) Slide the processing unit [1].
10) Place the A3 paper [1] onto the drum as shown in the figure.
This is for the purpose of light shielding.
Chapter 7
[1]
F-7-119
[1]
[1]
F-7-120
[1]
F-7-121
7-85