Moving Media; Unloading Media; Resetting The Vtl Target Ports; Nas Configuration Cli Commands - Quantum DXi V-Series Manual

Moving Media

Unloading Media

Resetting the VTL
Target Ports

NAS Configuration CLI Commands

NAS Configuration CLI Commands
location type = I/E Slot
index = 3
drive serial number = N/A
barcode = N/A
writeprotect = disabled
access = N/A
used = N/A
syscli --move media --name <VTL_name> --srctype slot | drive | ieslot
--desttype slot | drive | ieslot --srcindex <source_index> --destindex
<destination_index> [--forceunload]
This CLI allows the admin user to move media between virtual storage locations.
The media is moved from the specified source type and index location to the
specified type and index destination location. The location type and index can
be determined from the output of the --list vtlstorage command. The
--forceunload optional parameter refers only to virtual drive source location.
syscli --unload media (--barcode <media_barcode>) | { --loctype drive |
ieslot --index <index_location> } [--forceunload]
This CLI allows the admin user to unload media from virtual drive or import/
export virtual storage location specified by the barcode or the type and index
location. There may be one or more barcode specified to unload multiple media.
The option --forceunload refers to a virtual drive source location.
syscli --reset targetport [(--name <portname> )] [--sure]
This CLI allows the admin user to reset all or individual VTL target ports.
CLI command options:
• --reset - Resets one or more VTL target ports.
• --name - Port name. Can be specified repeatedly for additional ports. If no
port is specified, all ports will be reset.
• --sure - if specified, the command will execute immediately without asking
for confirmation.
The following sections describe the supported NAS configuration CLI
commands:
• Listing the Existing NAS Share and Attributes
Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-09 Rev B
February 2014
21