Media Station (MS) User Manual UM-S700 Thank you for purchasing this HITACHI product. To obtain the best performance and safety, please read this manual carefully. Please keep this manual for future reference.
Thank you for purchasing this HITACHI Media Station (MS). The instructions in this manual are described mainly with the remote control. You can also use the buttons on the MS if they have the same names as those on the remote control.
Important Safety Instructions Read Instructions - All the safety and operating Lightning - For added protection for the product instructions should be read before the product is during a lightning storm, or when it is left unattended operated. and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable Retain Instructions - The safety and operating system.
Safety Check - Upon completion of any service or Hazards of Electrical Shock and Fire - Do not touch repairs to the product, ask the service technician to the power cord with wet hands. Hold the plug when perform safety checks to determine that the product disconnecting the power cord.
TV. remove the batteries to prevent battery leakage. Connect the supplied control terminal cable to the control terminal at the rear panel and Hitachi LCD monitor. (For model UT32-MH700A/AW, UT37-MX700A/AW or UT42-MX700A/AW only).
AV2 Input terminals Connect to equipment with HDMI output. Connect to equipment with audio/composite video output. HDMI Output terminal Connect to equipment (e.g. Hitachi LCD monitor*) Audio Output terminals with HDMI input. Connect to equipment with audio input. AV3 Input terminals...
TV mode: Press to select the desired picture mode. Recall ( Press to show input signal status. Not available Not available Program Up/Down [Page Select] ( Press to select previous/next channel. Mute ( TV mode: Press to mute or restore the volume of your Hitachi TV. [Subtitle] (...
Picture Size ( TV mode: Press to select the desired picture format of your Hitachi TV. Some buttons are only for Teletext mode, and other buttons have different functions in Teletext mode from the use of TV/STB mode. Those buttons are indicated by [ ]. See “Teletext Operation” on page 11.
Other Equipment Connections You can connect VCR, DVD player, game console or other video equipment to the MS. To view external source pictures, press on the front panel or Direct Input Select buttons on the remote control to select the input source. Connect via HDMI [Example] DVD Player...
Basic Operation Power On/Off Stereo/Bilingual Sound Selection When you switched on power supply of the MS, the When receiving stereo/bilingual sound system, you can power indicator lights up in red (standby mode). select the sound output modes by using To turn on the MS To select stereo sound programme When a stereo programme is received, “...
Teletext Operation Teletext is the written information services provided by each TV channel. Most TV channels provide information via The shaded buttons shown below can be used to operate Teletext. Page Select Press to select a Teletext page. (Enter 3 digits) Hold ( Press to hold the current Teletext page.
Other Controls Controlling the DVD Player set manufacturer and set type that corresponds to the brand name of your DVD player. Change the remote control setting (e.g. Hitachi DVD player) Press DVD. The DVD button lights up. Simultaneously press and hold DVD and 1 to set the manufacturer.
Controlling the DVD Player (continue) The shaded buttons shown below can be used to control the DVD player. Using the remote control when the DVD mode is selected Power On/Standby ( ) Press to turn on or off the DVD player to standby mode.
Controlling the TV This remote control is preprogrammed to operate Hitachi TV. The shaded buttons shown below can be used to control the TV. Using the remote control when the TV mode is selected Power On ( ) Press to turn on the TV from standby mode.
Controlling the MS via LCD Monitor This remote control can be used to operate the MS via Hitachi LCD monitor’s (model: UT32-MH700A/AW, control terminal cable to the MS and LCD monitor (see page 5). Select STB mode before using the remote control to operate the MS via LCD monitor.
Menu Operation Picture Menu Contrast Brightness Color Sharpness Digital Noise Reduction Middle 2D3D Comb Filter Reset Select MENU Return Selected Items Setup Hints Contrast Adjust to increase or decrease the picture contrast. Brightness Adjust to brighten or darken the picture. Color Adjust to increase or decrease the colour intensity.
Timer Menu Sleep Timer -- Min. On Timer Select MENU Return Selected Items Setup Hints Sleep Timer -- Min. Set the length of time to switch off the MS to standby mode. 15 Min. 30 Min. 45 Min. 60 Min. 90 Min.
Function Menu Language English Menu Background Opaque Blue Background Child Lock Picture Size Full Select MENU Return Selected Items Setup Hints Language English Select the on-screen display language. Menu Background Opaque Select the menu background. Transparent Blue Background Select “On” to change the screen to blue at no signal condition.
Setup Menu (TV Mode) Auto Tuning Manual Tuning Program Sorting Teletext Language West Europe Select MENU Return Selected Items Setup Hints Auto Tuning Start From Press to set the start channel number for auto tuning. Search Tune for all the available channels automatically. Manual Tuning Position Set the channel number for manual tuning.
Setup Menu (TV Mode) (continue) Selected Items Setup Hints Teletext Language West Europe Select the appropriate teletext language. East Europe Russian Farsi Arabic Setup Menu (AV1 and AV2 Mode) Color System Auto Select MENU Return Selected Items Setup Hints Color System Auto Select the appropriate colour system according to the input signal.
Troubleshooting Before calling service personnel, please check the following troubleshooting guide. If any problem still persists, unplug the MS and call for servicing. Symptom Check List No picture, no sound Check if the main power of the MS is turned on. Check if the connection of the power cord and/or other cables.
Model Name UM-S700 General AC Adaptor Model: LAD6019AB4 (AC100-240V, 1.5A, 50-60Hz) Voltage Input DC 12V Rated Current Power Consumption Dimension With Stand 132 x 310 x 231mm (WxHxD) Without Stand 297 x 231 x 66mm Weight With Stand 1.65kg Without Stand 1.56kg...
Recommended Signal List HDMI Input Signal Chart Vertical Horizontal Dot Clock Signal Resolution Frequency Frequency Frequency (Hz) (kHz) (MHz) 640 x 480 31.47 25.18 576i 720(1440) x 576 15.63 27.00 480i 720(1440) x 480 15.73 27.00 576p 720 x 576 31.25 27.00 480p...