Start And Stop Of Engine - Kubota XN12-8 Operation Manual

Operations

Start and Stop of Engine

Start and Stop of Engine
Before Start of Engine
1. Adjust the seat to comfortable operating
position.
2. Check and ensure that the safety lock
handle is at locking position.
3. Check and ensure that all joysticks and
pedals are in neutral position.
4. Insert the key into starter switch, rotate to
ON position, and then check as below:
● All warning lamps turn on for 1s and the
warning tone is issued for 2s. The
instruments start working.
● Press the lamp switch and check and
ensure that the boom lamp turn on.
If a lamp fail to turn on or a warning lamp fails
to sound, the lamp bulb or wire is probably
damaged. Please contact Kenstone service agent
for repair.
3-3