Replacing Fuel Hoses And Clamps; Replacing Intake Air Line - Kubota KX080-3 Operator's Manual

Hide thumbs Also See for KX080-3:
Table of Contents

Advertisement

76
REGULAR CHECKS AND MAINTENANCE WORK
(1) Recovery tank
Radiator
Recovery tank
A Do not operate the engine without coolant.
A To fill the radiator system and the recovery tank, use
fresh water and anti-freeze fluid.
A When the anti-freeze is mixed with water, the anti-
freeze mixing ratio must be less than 50%.
A Tighten the radiator cap properly. If the cap is loosely
or not properly fitted, overheating of the engine can
result due to coolant fluid loss.
(A) "FULL"
(B) "LOW"
10.5 L
1.3 L
BReplacing Fuel Hoses and Clamps
Replace the hoses and clamps.
(See "Checking Fuel and Intake Air Line" in "EVERY 200
SERVICE HOURS")
(1) Fuel lines
(2) Clamp bands
BReplacing Intake Air line
Replace the hoses and clamps, if necessary.
(See "Checking Fuel and Intake Air Line" in "EVERY 200
SERVICE HOURS")
(1) Hoses
(2) Hose clamps

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents