Alignment Processing Items - Omron FH Series User Manual

Machine Simulator processing item
Position measurement processing item
Vision Master Calibration processing item
• Using the Flow:
The motionless workpiece (or a saved image) is continuously measured until the calibration is
completed. This allows you to easily verify the operation of the calibration flow with the FH/FHV
series Controller. Conventionally, you could not verity the calibration flow unless the Controller
was integrated into the system.
Refer to Machine Simulator of the Vision System FH/FHV Series Processing Item Function
Reference Manual (Cat. No. Z341).
10-9-5

Alignment Processing Items

The following processing items can be used as alignment processing items.
Refer to the following manual for details on processing items. Refer to Vision System FH/FHV Series
Processing Item Function Reference Manual (Cat. No. Z341).
Processing item
category
Measurement
support process-
ing items
(Inspection and
measurement
support items)
FH/FHV Series Vision System User's Manual (Z365-E1)
↓
↓
Processing item
Sub category
name
Machine setting Stage Data
processing items
Robot Data
Set the machine setting processing item to reference, and
then set the conditions of the actual coordinates to confirm.
Measure the position of the alignment marks or the position
of a special feature of the workpiece from the image in Cam-
era 1.
Out of the general measurement processing items
(Inspections and Measurements), you can use processing
items with measurement results that have an X and Y in the
calculation strings.
To output the position on the image, set Calibration on the
Output parameter tab page to OFF.
Set the machine setting processing item to reference, and
then set the sampling.
This processing item sets and retains data that is
related to a stage.
Enter the data based on the specifications of the
stage to use.
This processing item sets and retains data that is
related to the robot.
Enter the data based on the specifications of the
robot to use.
10 Advanced Usage
Description
10 - 67
10