Table of Contents
Advertisement
The page provides information about the active and alternate (backup) firmware
images in the device, and allows you to revert to the alternate image.
1.
Navigate to Maintenance > Configuration and click Save startup-config.
The Save Running Configuration to startup-config page displays.
2.
Click Save Configuration to FLASH the configuration changes to be saved
across a system reboot. All changes submitted since the previous save or sys-
tem reboot will be retained by the switch.
Figure 4.63 Save Running Configuration to Startup-config
4.5.4.2
Download Configuration
The function allows you to download any of the files on the device to a browser.
1.
Navigate to Maintenance > Configuration and click Download.
The Download Configuration page displays.
2.
Click a listed file name to select it.
3.
Click Download Configuration to start the download.
Download of running-config may require time to complete, as the file must be
prepared for download.
4.5.4.3
Upload Configuration
The function allows you to upload a file to the device with the exception of the default-
config file as it is read-only.
1.
Navigate to Maintenance > Configuration and click Upload.
The Upload Configuration page displays.
2.
Click Choose File to select a source file.
3.
Select the destination file on the File Name (target) column.
4.
If the destination is the running-config, the upload applies to the configuration in
one of two methods:
–
Replace mode: The current configuration is fully replaced with the configura-
tion in the uploaded file.
–
Merge mode: The uploaded file is merged into running-config.
EKI-8500 Series User Manual
Figure 4.64 Download Configuration
83
Advertisement
Table of Contents
