Table of Contents
Advertisement
Item
Clear All
4.5
Maintenance
4.5.1
Restart Device
The function allows for the restart of the device. After a restart, the switch boots
normally.
Navigate to Maintenance and click Restart Device.
1.
The Restart Device page displays.
2.
Click Yes to reboot the switch. Any configuration changes you have made since
the last time you issued a save will be lost.
Click No to cancel the reboot.
4.5.2
Factory Defaults
The function allows for the rest of the device to its factory default configuration.
1.
Navigate to Maintenance and click Restart Device.
The Factory Defaults page displays.
2.
Click Yes to reset the device to it's original factory defaults. All changes that
have been made will be lost, even if you have issued a save.
Reset settings take effect after a system reboot.
Click No to cancel the reboot.
4.5.3
Software
4.5.3.1
Upload
The function allows for the updating of the firmware controlling the switch.
1.
Navigate to Maintenance > Software and click Upload.
The Software Upload page displays.
Click Select File... to browse for a software image and select it.
2.
EKI-8500 Series User Manual
Description
Click Clear All to clear the blocked flags for all entries.
Figure 4.59 Restart Device
Figure 4.60 Factory Defaults
81
Advertisement
Table of Contents
