Figure 3.44: 802.1X/Radius System Configuration; Security - Advantech EKI-7659CPI User Manual

3.2.4

Security

In this section, you can configure 802.1x and MAC address table.
802.1X/Radius Configuration
802.1x is an IEEE authentication specification that allows a client to connect to a wireless access point or
wired switch but prevents the client from gaining access to the Internet until it provides authority, like a
user name and password that are verified by a separate server.
802.1X/Radius - System Configuration
After enabling the IEEE 802.1X function, you can configure the parameters of this function.
IEEE 802.1x Protocol: .enable or disable 802.1x protocol.
Radius Server IP: set the Radius Server IP address.
Server Port: set the UDP destination port for authentication requests to the specified Radius Server.
Accounting Port: set the UDP destination port for accounting requests to the specified Radius Server.
Shared Key: set an encryption key for using during authentication sessions with the specified radius
server. This key must match the encryption key used on the Radius Server.
NAS, Identifier: set the identifier for the radius client.
Click Apply .
802.1x/Radius - Port Configuration
You can configure 802.1x authentication state for each port. The State provides Disable, Accept, Reject
and Authorize. Use "Space" key change the state value.
Reject: the specified port is required to be held in the unauthorized state.
Accept: the specified port is required to be held in the Authorized state.
Authorized: the specified port is set to the Authorized or Unauthorized state in accordance with the
outcome of an authentication exchange between the Supplicant and the authentication server.
Disable: The specified port is required to be held in the Authorized state
Click Apply .
EKI-7659CPI_Manual_ed33

Figure 3.44: 802.1x/Radius System Configuration

76