Setup Mode Menus; Setup  Cfg: Configuration Information - Teledyne T200 Operation Manual

5.

SETUP MODE MENUS

5.1. SETUP  CFG: CONFIGURATION INFORMATION
Press NEXT of PREV to move back and
forth through the following list of
Configuration information:

MODEL NAME

PART NUMBER

SERIAL NUMBER

SOFTWARE REVISION

LIBRARY REVISION

CPU TYPE & OS REVISION
06858E DCN7057
Use SETUP Mode to set instrument parameters for performing configuration,
calibration, reporting and diagnostics operations according to user needs.
Pressing the CFG button displays the instrument configuration information, which lists
the analyzer model, serial number, firmware revision, software library revision, CPU
type and other information. Use CFG to identify the software and hardware when
contacting Technical Support. Special instrument or software features or installed
options may also be listed here.
SAMPLE
<TST TST> CAL
SETUP
DAS RNGE PASS CLK MORE
CFG
SETUP
PREV NEXT
RANGE=500.0 PPB NOX= XXXX
PRIMARY SETUP MENU
T200 NOX-O2 Analyzer
SETUP
Concentration field
displays all gases.
EXIT
Press exit at any
time to return to
the Sample display.
Press exit at any
time to return to
EXIT
the SETUP menu
81