Teledyne T200 Operation Manual page 121

Teledyne API – T200 NO/NO
5.9.3.11. EXTERNAL ANALOG INPUTS (XIN1...XIN8) OPTION CONFIGURATION
DIAG
PREV
DIAG AIO
< SET SET>
DIAG AIO
< SET SET>
DIAG AIO XIN1 OFFSET:0.00V
< SET SET> EDIT
DIAG AIO XIN1 UNITS:V
< SET SET> EDIT
DIAG AIO XIN1 DISPLAY:OFF
< SET EDIT
06858E DCN7057
/NO Analyzer Operation Manual
2 X
To configure the analyzer‟s optional external analog inputs, define for each channel:

gain (number of units represented by 1 volt)

offset (volts)

engineering units to be represented in volts (each press of the touchscreen button
scrolls the list of alphanumeric characters from A-Z and 0-9)

whether to display the channel in the Test functions
These parameters can also be captured in the internal Data Acquisition System (DAS);
refer to Appendix A for Analog-In DAS parameters.
To adjust settings for the Analog Inputs option parameters press:
ANALOG I / O CONFIGURATION
NEXT ENTR
AOUTS CALIBRATED: NO
CAL
XIN1:1.00,0.00,V,OFF
EDIT
DIAG AIO
SET>
EXIT
EXIT
EXIT
EXIT
Press SET> to scroll to the first
channel. Continue pressing SET>
EXIT
to view each of 8 channels.
EXIT
XIN1 GAIN:1.00V/V
EDIT EXIT
DIAG AIO
+ 0
Press to change
Gain value
Setup Mode Menus
Press EDIT at any channel
to to change Gain, Offset,
Units and whether to display
the channel in the Test
functions (OFF/ON).
XIN1 GAIN:1.00V/V
0 1 .0 0 ENTR EXIT
Pressing ENTR records the new setting
and returns to the previous menu.
Pressing EXIT ignores the new setting and
returns to the previous menu.
119