Teledyne T200 Operation Manual page 148

Communications Setup and Operation
To assign or reset the status flag bit assignments, press:
SAMPLE RANGE=500.0 PPB
<TST TST> CAL
SETUP X.X
PRIMARY SETUP MENU
CFG DAS RNGE PASS CLK
SETUP X.X
SECONDARY SETUP MENU
VARS DIAG
COMM
SETUP X.X
COMMUNICATIONS MENU
ID COM1 COM2
HESN
SETUP X.X HESSEN VARIATION:TYPE1
<SET SET> EDIT
Continue pressing SET until ...
The <CH and CH>
buttons move the
cursor brackets "[ ]‖
left and right along the
6.7.2.7. INSTRUMENT ID
146
Teledyne API – T200 NO/NO
NOX= XXXX
SETUP
Concentration field
displays all gases.
EXIT
MORE
EXIT
SETUP X.X
EXIT
EXIT
bit string.
INS Inserts a the
character at the
current location of the
cursor brackets.
Each instrument on a Hessen Protocol network must have a unique identifier (ID
number). Refer to Section 5.7.1 for information and to customize the ID of each.
HESSEN STATUS FLAGS
<SET SET> EDIT
SETUP X.X
IZS TEMP WARNING:0020
PREV NEXT
Continue pressing NEXT until desired
flag message is displayed
SETUP X.X
BOX TEMP WARNING:0008
PREV NEXT
SETUP X.X
BOX TEMP WARNING:[0]008
<CH CH> DEL [0]
/NO Analyzer Operation Manual
2 X
EXIT
EDIT PRNT EXIT
PRNT EXIT
EDIT
EXIT discards the
ENTR EXIT
ENTR accepts the
Press the [?] button repeatedly to cycle
through the available character set: 0-9
NOTE: Values of A-F can also be set
but are meaningless.
06858E DCN7057
new setting.
new setting.