Teledyne T200 Operation Manual page 103

Teledyne API – T200 NO/NO
Toggle these
buttons to enter
the correct
PASSWORD.
DO NOT CHANGE
these settings unless
specifically instructed to by
Teledyne API's Customer
Service
personnel.
06858E DCN7057
/NO Analyzer Operation Manual
2 X
To access and navigate the VARS menu, use the following button sequence:
SAMPLE RANGE=500.0 PPB
<TST TST> CAL
SETUP X.X
PRIMARY SETUP MENU
CFG DAS RNGE PASS CLK
MORE
SETUP X.X
SECONDARY SETUP MENU
COMM DIAG
VARS
SETUP X.X
ENTER PASSWORD:818
8 1 8
SETUP X.X
0) DAS_HOLD_OFF=15.0 Minutes
PREV JUMP
NEXT EDIT
SETUP X.X
1) MEASURE_MODE=NOX NO
PREV JUMP
NEXT EDIT
SETUP X.X
2) STABIL_GAS=NOX
PREV JUMP
NEXT EDIT
SETUP X.X
3) TPC_ENABLE
PREV JUMP
NEXT EDIT
SETUP X.X
4) DYN_ZERO=OFF
PREV JUMP
NEXT EDIT
SETUP X.X 5) DYN_SPAN=OFF
PREV JUMP
NEXT EDIT
SETUP X.X 6) IZS_SET=50.0 DegC
PREV JUMP EDIT PRNT EXIT
NEXT
SETUP X.X
7) CONC_PRECISION=AUTO
PREV JUMP
NEXT EDIT
SETUP X.X 8) CLOCK_ADJUST=0 Sec/Day
PREV JUMP EDIT ENTR EXIT
SETUP X.X
9) CAL_ON_NO2=OFF
PREV JUMP
NEXT EDIT
NOX= XXXX
SETUP
Concentration field
displays all gases.
EXIT
EXIT
EXIT
ENTR
PRNT EXIT
SETUP X.X
DAS_HOLD_OFF=15.0 Minutes
1 5 .0
PRNT EXIT
SETUP X.X
MEASURE_MODE=NOX-NO
PREV NEXT
PRNT EXIT
SETUP X.X
STABIL_GAS=NOX
NO NO2 NOX O2
PRNT EXIT
SETUP X.X
TPC_ENABLE=OFF
OFF
PRNT EXIT
SETUP X.X
DYN_ZERO=OFF
OFF
PRNT EXIT
SETUP X.X
DYN_SPAN=OFF
OFF
PRNT EXIT
SETUP X.X
CONC_PRECISION=AUTO
AUTO 1 2 3
SETUP X.X CLOCK_ADJUST=0 Sec/Day
+ 0 0
PRNT EXIT
SETUP X.X
CAL_ON_NO2=OFF
OFF
Setup Mode Menus
In all cases:
EXIT discards the new
setting.
ENTR accepts the
new setting.
ENTR EXIT
Toggle these buttons to set
the DAS HOLDOFF time
period in minutes
(MAX = 20 minutes).
ENTR EXIT
Toggle these keys to
choose the gas(es) for
analyzer's measurement
ENTR EXIT
Use these buttons to select
which gas will be reported
by the STABIL test
function.
(O is only available if the
2
optional O
installed)
ENTR EXIT
Toggle this button to turn
the Temperature /
Pressure compensation
ON/OFF.
ENTR EXIT
Toggle this button to turn
the Dynamic Zero
calibration feature ON/
ENTR EXIT
Toggle this button to turn
the Dynamic Span
calibration feature ON/
4 ENTR EXIT
Use these buttons to select
the precision of the
concentration display.
ENTR EXIT
Enter sign and number of
seconds per day the clock
gains (-) or loses(+).
ENTR EXIT
Toggle this button to turn
ON/OFF the analyzer's
ability to be calibrated
using NO2 span gas.
mode.
sensor is
2
feature
OFF.
OFF.
101