Table of Contents
Advertisement
TCD Analyzer
4.7.4 Failsafe/Non-Failsafe Mode
The user can set either or both the alarms to operate in failsafe or
non-failsafe mode by toggling the value in the edit box.
4.7.5 Latching/Non-Latching Alarm
The user can set whether the alarms will be latching or non-latching
by toggling the value (ON = Latching/OFF = non-latching) in the edit
box.
1. ON- Once the alarm or alarms trigger, it will remain in the
alarm mode even if process conditions revert to non-alarm
conditions. This mode requires an alarm to be recognized before
it can be reset.
2. OFF - The alarm status will terminate when process conditions
revert to non-alarm conditions.
An alarm is recognized by touching the Alarm icon
on the Main screen.
Teledyne Analytical Instruments
Operation
85
Advertisement
Table of Contents
