Setup Mode; Password Security; Primary Setup Menu; The Areas Accessible Under The Setup Mode Are Shown In Table 4-4 And Secondary Setup Menu (Setup>More) - Teledyne T300 Operation Manual

Teledyne API – Model T300/T300M CO Analyzer

4.3. SETUP MODE

4.3.1. PASSWORD SECURITY

4.3.2. PRIMARY SETUP MENU

4.3.3. THE AREAS ACCESSIBLE UNDER THE Setup MODE ARE SHOWN IN
TABLE 4-4 AND SECONDARY SETUP MENU (SETUP>MORE)
Table 4-4: Primary Setup Mode Features and Functions
MODE OR FEATURE
Analyzer Configuration
Auto Cal Feature
Internal Data Acquisition
(DAS)
Analog Output Reporting
Range Configuration
Calibration Password Security
Internal Clock Configuration
Advanced SETUP features
06864B DCN6314
The SETUP mode contains a variety of choices that are used to configure the analyzer's
hardware and software features, perform diagnostic procedures, gather information on
the instrument's performance, and configure or access data from the internal data
acquisition system (DAS). For a visual representation of the software menu trees, refer
to Appendix A.
Setup Mode is divided between Primary and Secondary Setup menus and can be
protected through password security.
Setup Mode can be protected by password security through the SETUP>PASS menu
(Section 5.5) to prevent unauthorized or inadvertent configuration adjustments.
Table 4-5.
CONTROL
BUTTON
CFG
Lists button hardware and software configuration information
Used to set up and operate the AutoCal feature.
ACAL
Only appears if the analyzer has one of the internal valve
options installed.
DAS
Used to set up the DAS system and view recorded data
Used to configure the output signals generated by the
RNGE
instruments Analog outputs.
PASS
Turns the calibration password feature ON/OFF.
CLK
Used to Set or adjust the instrument's internal clock.
MORE
This button accesses the instruments secondary setup menu.
Overview of Operating Modes
DESCRIPTION
MANUAL
SECTION
5
5.2
and
9.4
7
5.7
5.3
5.6
See
Table 6-5
95