Teledyne T200 Operation Manual page 67

Teledyne API – T200 NO/NO
Suppresses the
warning messages
Once the last warning has
been cleared, the analyzer will
automatically switch to
SAMPLE mode
06858E DCN7057
/NO Analyzer Operation Manual
2 X
SAMPLE SYSTEM RESET
TEST CAL
SAMPLE SYSTEM RESET
TEST CAL
SAMPLE SYSTEM RESET
TEST CAL
SYSTEM SYSTEM RESET
TEST
STANDBY RANGE=500.0 PPB
TEST CAL
Table 3-11 lists brief descriptions of the warning messages that may occur during start
up.
If a warning message persists after
several attempts to clear it, the message
may indicate a real problem and not an
artifact of the warm-up period
MSG CLR SETUP
MSG returns the active
warnings to the message
MSG CLR SETUP
Press CLR to clear the current
MSG CLR SETUP
If more than one warning is active, the
next message will take its place until all
warning messages have been cleared.
CLR SETUP
NOX=XXXX
Concentration field displays
MSG SETUP
Getting Started
NOTE:
field.
message.
all gases.
65