Teledyne T200 Operation Manual page 78

Overview of Operating Modes
DISPLAY PARAMETER
HVPS
HVPS
RCELLTEMP
RCELL TEMP
BOXTEMP
BOX TEMP
PMTTEMP
PMT TEMP
1
IZSTEMP
IZS TEMP
CONVTEMP
MOLY TEMP
RCELLPRESS
RCEL
SAMPPRESS
SAMP
NOXSLOPE
NOX SLOPE
NOXOFFSET
NOX OFFS
NOSLOPE
NO SLOPE
NOOFFSET
NO OFFS
TESTCHAN
TEST
CLOCKTIME
TIME
1
Only appears if Internal Span Gas Generator option is installed.
I
MPORTANT
76
Teledyne API – T200 NO/NO
UNITS
V
C
C
C
C
C
IN-HG-A
IN-HG-A
MV
MV
MV
HH:MM:SS
A value of ―XXXX‖ displayed for any of the TEST functions indicates an out-of-
range reading or the analyzer's inability to calculate it. All pressure
measurements are represented in terms of absolute pressure. Absolute,
atmospheric pressure is 29.92 in-Hg-A at sea level. It decreases about 1 in-Hg
per 300 m gain in altitude. A variety of factors such as air conditioning and
passing storms can cause changes in the absolute atmospheric pressure.
DESCRIPTION
The output power level of the high voltage power supply.
The temperature of the gas inside the reaction cell temperature.
The temperature inside the analyzer chassis.
The temperature of the PMT .
The temperature of the internal span gas generator's permeation tube.
The temperature of the analyzer's
The current pressure of the sample gas in the reaction cell as measured at
the vacuum manifold.
The current pressure of the sample gas as it enters the reaction cell,
measured between the NO/NO
The slope calculated during the most recent NO
The offset calculated during the most recent NO
The slope calculated during the most recent NO zero/span calibration.
The offset calculated during the most recent NO zero/span calibration.
Displays the signal level of the Test Function that is currently being
produced by the Analog Output Channel A4.
The current time. This is used to create a time stamp on DAS readings,
and by the AutoCal feature to trigger calibration events.
I R
MPACT ON EADINGS OR
/NO Analyzer Operation Manual
2 X
NO
 NO converter.
2
and Auto-Zero valves.
x
zero/span calibration.
x
zero/span calibration.
x
D
ATA
06858E DCN7057