Figure 5-5: Accessing The Analog I/O Configuration Submenus - Teledyne T200 Operation Manual

Setup Mode Menus
Toggle these
buttons to enter
the correct
PASSWORD.
Figure 5-5:
106
Teledyne API – T200 NO/NO
To access the ANALOG I/O CONFIGURATION sub menu, press:
SAMPLE RANGE=500.0 PPB
<TST TST> CAL
SETUP X.X
PRIMARY SETUP MENU
CFG DAS RNGE PASS CLK
SETUP X.X
SECONDARY SETUP MENU
COMM VARS
DIAG
SETUP X.X
ENTER PASSWORD:818
8 1 8
DIAG SIGNAL I/O
NEXT
Continue pressing NEXT until ...
AIO Configuration Submenu
DIAG
ANALOG I/O CONFIGURATION
PREV NEXT
DIAG AIO A OUTS CALIBRATED: NO
<SET CAL
SET>
DIAG AIO CONC_OUT_1: 5V, OVR, NOCAL
<SET EDIT
SET>
DIAG AIO CONC_OUT_2: 5V, OVR, NOCAL
<SET EDIT
SET>
DIAG AIO CONC_OUT_3: 5V, OVR, NOCAL
<SET EDIT
SET>
DIAG AIO TEST_OUTPUT: 5V,OVR, NOCAL
<SET EDIT
SET>
DIAG AIO AIN CALIBRATED: NO
<SET CAL
SET>
DIAG AIO XIN1:1.00,0.00,V,OFF
<SET CAL
SET>
Accessing the Analog I/O Configuration Submenus
NOX= XXXX
SETUP
Concentration field
displays all gases.
EXIT
MORE
EXIT
EXIT
ENTR
ENTR EXIT
EXIT
ENTR
EXIT
Adjusts the signal output
EXIT
for Analog Output A1.
Adjusts the signal output
EXIT
for Analog Output A2.
Adjusts the signal output
EXIT
for Analog Output A3.
Selects the parameter to be
output on the TEST channel and
EXIT
Replaced by CONC_OUT_4
on analyzers with the optional
EXIT
EXIT
Press
/NO Analyzer Operation Manual
2 X
adjusts its signal output.
(O Concentration)
2
O sensor installed.
2
SET>
to scroll to 8 channels.
06858E DCN7057