Appendix A-2: Setup Variables - Teledyne T200 Operation Manual

Teledyne API - T200, T204 and 200E Series (05295F DCN6900)

APPENDIX A-2: Setup Variables

Setup Variable
DAS_HOLD_OFF
MEASURE_MODE
STABIL_GAS
TPC_ENABLE
DYN_ZERO
DYN_SPAN
1
IZS_SET
CONC_PRECISION
4
STAT_REP_GAS
REM_CAL_DURATI
4
ON
CLOCK_ADJ
1
CAL_ON_NO2
SERVICE_CLEAR
TIME_SINCE_SVC
SVC_INTERVAL
1
T200 and M200E.
2
T200H and M200EH.
3
T200U and M200EU.
4
TAI protocol
5
O option.
2
6
CO option.
2
06858E DCN7057
Table A-1:
Numeric Default
Units Value
Minutes 15 0.5–20
NO,
— NO-NOX,
4 NOX, NOX-NO,
NOX
NON-OX
NO,
— NOX
NO2,
NOX,
O2
CO2
OFF, ON
— ON
ON, OFF
— OFF
ON, OFF
— OFF
30–70
ºC 51
Warnings:
50–52
1
AUTO,
— AUTO ,
2, 3
0,
3
1,
2,
3,
4
NO,
— NOX
NO2,
NOX,
CO2
O2
Minutes 20 1–120
Sec./Da 0 -60–60
y
— OFF ON, OFF
OFF
— OFF
ON
Hours 0 0–500000
Hours 0 0–100000
Setup Variables
Value Range
Duration of DAS hold off period.
Gas measure mode. Enclose value in
double quotes (") when setting from the
RS-232 interface.
Selects gas for stability measurement.
Enclose value in double quotes (") when
setting from the RS-232 interface.
5
,
6
ON enables temperature/ pressure
compensation; OFF disables it.
ON enables remote dynamic zero
calibration; OFF disables it.
ON enables remote dynamic span
calibration; OFF disables it.
IZS temperature set point and warning
limits.
Number of digits to display to the right of
the decimal point for concentrations on the
display. Enclose value in double quotes (")
when setting from the RS-232 interface.
Selects gas to report in TAI protocol status
message. Enclose value in double quotes
(") when setting from the RS-232 interface.
6
,
5
Duration of automatic calibration initiated
from TAI protocol.
Time-of-day clock speed adjustment.
ON enables span calibration on pure NO
OFF disables it.
ON resets the service interval timer.
Time since last service.
Sets the interval between service
reminders.
APPENDIX A-2: Setup Variables
Description
;
2
A-9