Epa Reference Designation - Teledyne T200 Operation Manual

Specifications, Approvals, & Compliance
Parameter
Standard I/O
Optional I/O
Dimensions H x W x D
Weight
Operating Temperature Range
Humidity Range
Environmental Conditions
1
As defined by the US EPA.
2
Defined as twice the zero noise level by the US EPA.

2.2. EPA REFERENCE DESIGNATION

20
Teledyne API – T200 NO/NO
1 Ethernet: 10/100Base-T
2 RS-232 (300 – 115,200 baud)
2 USB device ports
8 opto-isolated digital status outputs (7 defined, 1 spare)
6 opto-isolated digital control inputs (4 defined, 2 spar)
4 analog outputs
1 USB com port
1 RS485
8 analog inputs (0-10V, 12-bit)
4 digital alarm outputs
Multidrop RS232
3 4-20mA current outputs
7" x 17" x 23.5" (178mm x 432 mm x 597 mm)
Analyzer: 40 lbs (18 kg)
External Pump Pack: 15 lbs (7 kg)
5 - 40 C (with EPA equivalency)
0-95% RH non-condensing
Installation Category (Over voltage Category) II Pollution Degree 2
Intended for Indoor Use Only at Altitudes  2000m
Teledyne API‟s T200 nitrogen oxides analyzer is designated as an automated reference
method (Number RFNA-1194-099) for NO
53, when operated under the following conditions:

Range: Any full-scale range between 0-0.05 and 0-1.0 ppm (parts per million).

Ambient temperature range of 5 to 40°C.

With PTFE filter element or a Kynar® DFU installed in the internal filter assembly.

Equipped with ozone supply air filter

Gas flow supplied by an external vacuum pump capable of ≤10 in-Hg-A at 2
standard liters per minute (slpm).

Software Settings, see Table 2-2:
Table 2-2: T200 Software Settings for EPA Reference
Parameter
Dynamic Zero
Dynamic Span
CAL-on-NO
2
Dilution Factor
Temp/Pres compensation
AutoCal
Independent range
Auto range
2
Specification
measurement, as defined in 40 CFR Part
2
Setting
OFF or ON
OFF
OFF
1.0 or OFF
ON
ON or OFF
ON or OFF
ON or OFF
/NO Analyzer Operation Manual
X
06858E DCN7057