Teledyne T200 Operation Manual page 162

Data Acquisition System (DAS) and APICOM
Use the PREV and
NEXT buttons to
scroll to the DATA
CHANNEL to be
edited.
Toggle these buttons to
set the days between
reports (0 – 366).
Press buttons to set amount of
time between reports, in hours
(HH) and/or minutes (MM)
(max: 23:59). 01:00 sets a
report to be made every hour.
160
Teledyne API – T200 NO/NO
To define the REPORT PERIOD, follow the instruction shown in Section 7.1.3 then
press:
Starting at the EDIT CHANNEL MENU
SETUP X.X
PREV NEXT
SETUP X.X
<SET SET>
Continue pressing SET> until ...
SETUP X.X
<SET SET> EDIT
SETUP X.X
0 0
SETUP X.X
0 1
The SAMPLE PERIOD and REPORT PERIOD intervals are synchronized to the
beginning and end of the appropriate interval of the instruments internal clock.

If SAMPLE PERIOD is set for one minute the first reading would occur at the
beginning of the next full minute according to the instrument's internal clock.

If the REPORT PERIOD is set for of one hour, the first report activity would occur at
the beginning of the next full hour according to the instrument's internal clock.
EXAMPLE:
Given the above settings, if DAS parameters are activated at 7:57:35 the first sample
would occur at 7:58 and the first report would be calculated at 8:00 consisting of data
points for 7:58. 7:59 and 8:00.
During the next hour (from 8:01 to 9:00), the instrument will take a sample reading
every minute and include 60 sample readings.
0) CONC: ATIMER 5, 800
INS DEL PRNT
EDIT
NAME: CONC
EDIT
REPORT PERIOD:000:01:00
EXIT
REPORT PERIOD DAYS:0
0 ENTR EXIT
REPORT PERIOD TIME:01:00
:0 0 ENTR EXIT
/NO Analyzer Operation Manual
2 X
EXIT
EXIT
EXIT discards the new
setting.
ENTR accepts the
new setting.
06858E DCN7057