Table 7-2: Das Data Channel Properties - Teledyne T200 Operation Manual

Teledyne API – T200 NO/NO

Table 7-2: DAS Data Channel Properties

PROPERTY
The name of the data channel.
NAME
The event that triggers the data channel to
TRIGGERING
measure and store the datum.
EVENT
NUMBER AND
A user-configurable list of data types to be
LIST OF
recorded in any given channel.
PARAMETERS
The amount of time between each channel data
REPORT PERIOD
point.
The number of reports that will be stored in the
NUMBER OF
data file. Once the limit is exceeded, the oldest
RECORDS
data is over-written.
Enables the analyzer to automatically report
RS-232 REPORT
channel values to the RS-232 ports.
Enables or disables the channel. Allows a channel
CHANNEL
to be temporarily turned off without deleting it.
ENABLED
Disables sampling of data parameters while
CAL HOLD OFF
instrument is in calibration mode
1
More with APICOM, but only the first six are displayed on the front panel).
2
When enabled records are not recorded until the DAS_HOLD OFF period is passed after calibration mode. DAS_HOLD OFF SET in
the VARS menu (see Section 5.8).
06858E DCN7057
/NO Analyzer Operation Manual Data Acquisition System (DAS) and APICOM
2 X
DESCRIPTION
2
.
DEFAULT
SETTING RANGE
SETTING
Up to 6 letters or digits
―NONE‖
Any available event
ATIMER
(see Appendix A-5).
Any available parameter
1
(PMTDET) (see Appendix A-5).
000:00:01 to
000:01:00
366:23:59
(1 hour)
(Days:Hours:Minutes)
Limited by available
storage space, which
100
depends on DAS
configuration.
OFF or ON
OFF
OFF or ON
ON
OFF or ON
OFF
1
.
149