Figure 3-2: Display Screen And Touch Control - Teledyne T200 Operation Manual

Getting Started
ATTENTION
26
Teledyne API – T200 NO/NO
Figure 3-2:
The front panel interface shows a splash screen and other initialization indicators before
the main display appears, similar to Figure 3-2 above. The LEDs on the display screen
indicate the Sample, Calibration and Fault states; also on the screen is the gas
concentration field (Conc), which displays real-time readouts for the primary gases, NO,
NO , and NO , and for the secondary gas if installed. The display screen also shows
2 x
what mode the analyzer is currently in (Mode field), as well as messages and data
(Param field). Along the bottom of the screen is a row of touch control buttons; only
those that are currently applicable will have a label. Table 3-2 provides detailed
information for each component of the screen.
COULD DAMAGE INSTRUMENT AND VOID WARRANTY
Do not use hard-surfaced instruments such as pens to touch the control buttons.
/NO
2 X
Display Screen and Touch Control
Analyzer Operation Manual
06858E DCN7057