Setup  Pass: Password Protection - Teledyne T200 Operation Manual

Teledyne API – T200 NO/NO
5.5. SETUP  PASS: PASSWORD PROTECTION
Table 5-2: Password Levels
PASSWORD LEVEL
Null (000) Operation
101 Configuration/Maintenance
818 Configuration/Maintenance
06858E DCN7057
/NO Analyzer Operation Manual
2 X
The T200 provides password protection against accidental or unauthorized adjustments
to the calibration and setup functions. When the passwords have been enabled in the
PASS menu, the system prompts the user for a password anytime a password-protected
function is selected. This allows normal operation of the instrument, but requires the
password (101) to access the menus under SETUP. When PASSWORD is disabled
(PASS>OFF), any operator can enter the Primary Setup (SETUP) and Secondary Setup
(SETUP>MORE) menus, although, a password (default 818) is still required to enter the
VARS or DIAG menus in the Secondary Setup menu.
To enable password protection:
1. Press SETUP>PASS.
2. Press OFF (display shows PASSWORD ENABLE:ON and the OFF button becomes
the ON button).
3. Press ENTR to accept the new setting (pressing EXIT in this submenu ignores the
change and sends an audible signal indicating that the new setting did not take
effect), and returns to the Primary Setup Menu.
4. EXIT the Primary Setup Menu to finish making the change effective.
There are three levels of password protection, which correspond to operator,
maintenance and configuration functions.
functions in the previous level.
All functions of the MAIN menu: TEST, GEN, initiate SEQ , MSG, CLR
Access to Primary Setup and Secondary SETUP Menus when PASSWORD is
enabled.
Access to Secondary SETUP Submenus VARS and DIAG whether PASSWORD
is enabled or disabled.
Each level allows access to all of the
MENU ACCESS ALLOWED
Setup Mode Menus
93