Teledyne T200 Operation Manual page 371

Teledyne API - T200, T204 and 200E Series (05295F DCN6900)
The command syntax follows the command type, separated by a space character. Strings in
[brackets] are optional designators. The following key assignments also apply.
06858E DCN7057
Terminal Key Assignments
ESC Abort line
CR (ENTER) Execute command
Ctrl-C Switch to computer mode
Computer Mode Key Assignments
LF (line feed) Execute command
Ctrl-T Switch to terminal mode
Appendix A3: Warnings and Test Measurements, Software Version K.3
A-27