Figure 6-1. Com - Communication Modes Setup - Teledyne T200 Operation Manual

Teledyne API – T200 NO/NO
Use the PREV and
NEXT buttons to
scroll between the
available modes
Activate / Deactivate
the selected mode by
toggling the ON /
OFF button
06858E DCN7057
/NO Analyzer Operation Manual
2 X
Communication Modes for each COM port must be configured independently. To turn
on or off the communication modes for either COM1 or COM2, access the
SETUP>MORE.[COM1 OR COM2] menu, and at the COM1 [2] Mode menu press
EDIT.
SAMPLE RANGE=500.0 PPB
<TST TST> CAL
SETUP PRIMARY SETUP MENU
CFG DAS RNGE PASS CLK
SETUP SECONDARY SETUP MENU
COMM VARS DIAG
SETUP COMMUNICATIONS MENU
ID INET COM1
SETUP COM1 MODE:0
<SET SET> EDIT
SETUP COM1 QUIET MODE:OFF
PREV NEXT OFF
SETUP COM1 HESSEN PROTOCOL:OFF
PREV NEXT OFF
SETUP COM1 HESSEN PROTOCOL:ON
PREV NEXT ON
PREV and NEXT buttons to continue selecting
other COM modes you want to enable or disable
using the ON or OFF button.
COM – Communication Modes Setup
Figure 6-1.
Communications Setup and Operation
NOX= XXXX
SETUP
MORE EXIT
EXIT
COM2 EXIT
EXIT
EXIT
ENTR EXIT
ENTR EXIT
Concentration field
displays all gases.
Combined Mode ID
displayed here.
EXIT discards the new
setting.
ENTR accepts the
new setting.
125