Teledyne T200 Operation Manual page 19

Teledyne API – T200 NO/NO
Option
Option
Number
Carrying Strap/Handle
29
TO AVOID PERSONAL INJURY WE RECOMMEND THAT TWO PERSONS LIFT AND CARRY THE
ANALYZER. DISCONNECT ALL CABLES AND TUBING FROM THE ANALYZER BEFORE MOVING IT.
Analog Input and USB port
64B
Current Loop Analog
Outputs
41
Parts Kits
42A
43
45
Calibration Valves
50A
50B
50G
NO Permeation Tubes
2
52B
52G
Each tube comes with a calibration certificate, traceable to a NIST standard,
specifying its actual effusion rate of that tube to within ± 5% @ 0.56 liters per
06858E DCN7057
/NO Analyzer Operation Manual
2 X
Description/Notes
Side-mounted strap for hand-carrying analyzer
Extends from "flat" position to accommodate hand for carrying.
Recesses to 9mm (3/8") dimension for storage.
Can be used with rack mount brackets, Option 21.
Cannot be used with rack mount slides.
CAUTION – GENERAL SAFETY HAZARD
THE T200 ANALYZER WEIGHS ABOUT 18 KG (40 POUNDS).
Used for connecting external voltage signals from other instrumentation (such as
meteorological instruments).
Also can be used for logging these signals in the analyzer's internal
DAS
Adds isolated, voltage-to-current conversion circuitry to the analyzer's analog
outputs.
Can be configured for any output range between 0 and 20 mA.
May be ordered separately for any of the analog outputs.
Can be installed at the factory or retrofitted in the field.
Spare parts and expendables
Expendables Kit includes a recommended set of expendables for
one year of operation of this instrument including replacement
sample particulate filters.
Expendables Kit with IZS includes the items needed to refurbish
the zero air scrubber.
Spare Parts Kit includes spares parts for one unit.
Used to control the flow of calibration gases generated from external sources,
rather than manually switching the rear panel pneumatic connections.
AMBIENT ZERO AND AMBIENT SPAN VALVES
Zero Air and Span Gas input supplied at ambient pressure.
Gases controlled by 2 internal valves; SAMPLE/CAL & ZERO/SPAN.
AMBIENT ZERO AND PRESSURIZED SPAN VALVES
Span Gas input from external, pressurized source;
Span Gas flow rate maintained at 1 ATM by critical flow orifice & vented
through Vent port.
Shutoff valve stops flow of Span Gas when in sample mode to preserve
pressurized gas source.
Zero Air created via 2-stage scrubber & dry filter unit (DFU).
Gases controlled by 2 internal valves; SAMPLE/CAL & ZERO/SPAN.
ZERO SCRUBBER AND INTERNAL SPAN SOURCE (IZS)
Span Gas generated from internal
Zero Air created by 2-stage scrubber & DFU.
Gases controlled by 2 internal valves: Sample/Cal & Zero/Span
Replacement tubes; identical size/shape; different permeation rates.
Permeation Rate
Approximate NO
( 25%)
421 ng/min 300ppb – 500 ppb  25%
0600 – 1000 ppb  25%
842 ng/min
NO
permeation tube
2
.
Concentration @ 50°C
2
Introduction
Reference
(TAPI Sales)
Sections 3.3.1.2,
and 7
Sections 3.3.1.4
and 5.9.3.7
Appendix B
Appendix B
Appendix B
Section 3.3.2.3
Section 3.3.2.4
Sections 3.3.2.5
and 3.3.2.6
(TAPI Sales)
(TAPI Sales)
Section 3.3.2.5
17