Figure 6-6. Com - Change Hostname - Teledyne T200 Operation Manual

Teledyne API – T200 NO/NO
6.5.2.1. CHANGING THE ANALYZER'S HOSTNAME
BUTTON
<CH
Moves the cursor one character to the left.
CH> Moves the cursor one character to the right.
INS
Inserts a character before the cursor location.
DEL Deletes a character at the cursor location.
Press this button to cycle through th e range of
numerals and chara cters available for
[?]
insertion. 0- 9, A- Z, space ' ~ !
) - _ = +[ ] { } < >\ | ; : , . / ?
Accepts the new setting and returns to the
ENTR
previous menu.
Ignores the new setting and returns to the
EXIT
previo us menu.
Some buttons only appear as applicable .
06858E DCN7057
/NO Analyzer Operation Manual
2 X
The HOSTNAME is the name by which the analyzer appears on your network. The
initial default Hostname is blank. To assign or change this name (particularly if you
have more than one T200 analyzer on your network, where each must have a different
Hostname), enter the SETUP>COMM>INET men and scroll to the HOSTNAME menu
as in Figure 6-5; make the changes as shown in Figure 6-6:
FUNCTION
# $ % ^ & * (
SETUP X.X INITIALIZATION SUCCEEDED
Figure 6-6.
Communications Setup and Operation
SETUP X.X HOSTNAME:
<SET SET> EDIT
SETUP X.X HOSTNAME:
<CH CH> INS DEL [?]
Use these buttons to edit the HOSTNAME
SETUP X.X HOSTNAME: T200–STATION#2
<CH CH> INS DEL [?]
SETUP X.X INITIALIZING INET 0%
INITIALIZATION process proceeds
automatically
SETUP X.X
SETUP X.X COMMUNICATIONS MENU
ID ADDR INET
COM – Change Hostname
EXIT
ENTR EXIT
(example name)
ENTR EXIT
ENTR accepts
the new setting.
EXIT ignores the
new setting.
INITIALIZATION FAILED
Contact your
EXIT
IT Network
Administrator.
133