Editing Das Data Channels - Teledyne T200 Operation Manual

Data Acquisition System (DAS) and APICOM

7.1.3. EDITING DAS DATA CHANNELS

SAMPLE RANGE=500.0 PPB
<TST TST> CAL
SETUP X.X
PRIMARY SETUP MENU
CFG RNGE PASS CLK MORE
DAS
Main DAS Menu
SETUP X.X
DATA ACQUISITION
VIEW
EDIT
SETUP X.X
ENTER PASSWORD:818
8 1 8
EDIT Channel Menu
SETUP X.X
0) CONC: ATIMER 4, 800
PREV NEXT INS
Enters EDIT mode for the selected channel
154
Teledyne API – T200 NO/NO
DAS configuration is most conveniently done through the APICOM remote control
program. The following list of button strokes shows how to edit using the front panel.
NOX= XXXX
SETUP
EXIT
EXIT
EXIT
ENTR
DEL PRNT
EDIT EXIT
When editing the data channels, the top line of the display indicates some of the
configuration parameters.
For example, the display line:
0) NXCNC1: ATIMER, 5, 800
Translates to the following configuration:
Channel No.: 0
NAME: NXCNC1
TRIGGER EVENT: ATIMER
PARAMETERS: Five parameters are included in this channel
EVENT: This channel is set up to store 800 records.
/NO
2
Concentration field
displays all gases.
DAS EDIT – Touchscreen Button Functions
Button
Selects the previous data channel in the list
PREV
Selects the next data channel in the list
NEXT
Inserts a new data channel into the list BEFORE the
INS
selected channel
Deletes the currently selected data channel
DEL
Enters EDIT mode
EDIT
Exports the configuration of all data channels to the
PRINT
RS-232 interface
Buttons only appear when applicable.
Analyzer Operation Manual
X
FUNCTION
06858E DCN7057