Teledyne T200 Operation Manual page 160

Data Acquisition System (DAS) and APICOM
YES deletes all data
currently stored for
this data channel and
continues into EDIT
mode.
Toggle these
buttons to select a
different parameter.
Pressing <SET
returns to the
previous Function.
Note
158
Teledyne API – T200 NO/NO
To modify, add or delete a parameter, follow the instruction shown in Section 7.1.3 then
press:
Starting at the EDIT CHANNEL MENU
SETUP X.X
0) CONC: ATIMER 5, 800
PREV NEXT INS DEL
SETUP X.X
NAME: CONC
EDIT
<SET SET>
Continue pressing <SET or SET> until ...
SETUP X.X
PARAMETER:5
<SET SET> EDIT
SETUP X.X
EDIT PARAMS (DELETE DATA)?
YES NO
SETUP X.X
0) PARAM=NXCNC1, MODE=AVG
INS DEL
PREV NEXT
SETUP X.X
PARAMETER:NXCNC1
<SET SET> EDIT
SETUP X.X
SAMPLE MODE:AVG
<SET SET> EDIT
SETUP X.X
PRECISION:4
<SET SET> EDIT
SETUP X.X
STOR NUM SAMPLE:OFF
<SET EDIT
When the STORE NUM SAMPLES feature is turned on, the instrument will store
the number of measurements that were used to compute the AVG, SDEV, MIN or
MAX value but not the actual measurements themselves.
DAS EDIT – Touchscreen Functions
Button
PREV
PRNT
EDIT EXIT
NEXT
<SET
SET>
EXIT
INS
DEL
EDIT
PRINT
Buttons only appear when applicable
EXIT
NO retains the
data and
returns to the
previous
menu.
EXIT
EDIT
EXIT
SETUP X.X
PARAMETER:NXCNC1
PREV NEXT
EXIT
SETUP X.X
PARAMETER:NXCNC1
INST AVG SDEV MIN MAX
EXIT
SETUP X.X
PRECISION:5
5
EXIT
SETUP X.X
STOR NUM SAMPLE:OFF
OFF
/NO Analyzer Operation Manual
2 X
FUNCTION
Selects the previous data channel or parameter
Selects the next data channel or parameter
Selects the previous property to be edited
Selects the next property to be edited
Inserts a new data channel or parameter into the list
BEFORE the selected channel
Deletes the currently selected data channel or
parameter
Enters EDIT mode
Exports the configuration of all data channels to the
RS-232 interface
EXIT discards the new
setting.
ENTR accepts the
new setting.
ENTR EXIT
Toggle these buttons to
cycle through the list of
available parameters.
ENTR EXIT
Press the desired
MODE button.
ENTR EXIT
Toggle this button to
set from 1 to 4.
ENTR EXIT
Toggle this button to
turn ON/OFF.
06858E DCN7057