Getting Started
3.3.2.5. ZERO SCRUBBER AND INTERNAL SPAN SOURCE (IZS) (OPT 50G)
60
Teledyne API – T200 NO/NO
Table 3-9:
Valve Operating States OPT 50B installed
MODE
VALVE
Sample/Cal
Zero/Span
SAMPLE
Span Shutoff
Zero Air Shutoff
Sample/Cal
Zero/Span
ZERO CAL
Span Shutoff
Zero Air Shutoff
Sample/Cal
Zero/Span
SPAN CAL
Span Shutoff
Zero Air Shutoff
The internal NO
span gas generator and calibration valve option is intended for
2
applications where there is a need for frequent automated calibration checks without
access to an external source of span gas.
This valve package includes:
a 2-stage external scrubber for producing zero air
50% Purafil Chemisorbant
50% charcoal (for removal of the NO
a heated enclosure for a NO
This option package DOES NOT contain an actual permeation tube. See
Table 1-1 for information on specifying the correct permeation tube for each
application.
a special desorber that removes all HNO
one additional gas inlet port (ZERO AIR)
one additional gas outlet port (FROM DRYER)
two internal valves for switching between the sample gas inlet and the output of the
zero/span subsystem
/NO
2
CONDITION
Open to SAMPLE inlet
Open to ZERO AIR inlet
Closed
Closed
Open to ZERO/SPAN Valve
Open to ZERO AIR inlet
OPEN
1
Closed
Open to ZERO/SPAN Valve
Open to SPAN inlet
Closed
OPEN
®
(for conversion of NO NO
)
2
permeation tube
2
from the calibration gas stream
3
Analyzer Operation Manual
X
VALVE PORT
STATUS
NO COM
NO COM
NC COM
NO COM
NC COM
NC COM
)
2
06858E DCN7057