Teledyne T200 Operation Manual page 231

Teledyne API – T200 NO/NO
Suppresses the
warning messages.
Once the last warning has
been cleared, the analyzer's
display will return to its
standard Sample Mode
configuration.
06858E DCN7057
/NO Analyzer Operation Manual
2 X
The following display/touch screen examples provide an illustration of each:
The analyzer will also alert the user via the Serial I/O COM port(s).
To view or clear the various warning messages press:
SAMPLE O3 GEN WARNING
TEST CAL
SAMPLE O3 GEN WARNING
TEST CAL
SAMPLE O3 GEN WARNING
TEST CAL
SYSTEM O3 GEN WARNING
TEST
STANDBY RANGE=500.0 PPB
TEST CAL
If a warning message persists after
several attempts to clear it, the message
may indicate a real problem and not an
MSG CLR SETUP
artifact of the warm-up period.
MSG returns the active
MSG CLR SETUP
warnings to the message
Press CLR to clear the current
MSG CLR SETUP
If more than one warning is
active, the next message will take
CLR SETUP
NOX=XXXX
The display will continually
cycle between showing the
MSG SETUP
current NO
Troubleshooting & Service
NOTE:
field.
message.
its place.
, NO and NO
X 2
concentrations.
229