Setup Mode; Table 4-4: Primary Setup Mode Features And Functions; Table 4-5: Secondary Setup Mode Features And Functions - Teledyne T360 Operation Manual

Teledyne API Model T360/T360M Operation Manual

4.4. SETUP MODE

Table 4-4: Primary Setup Mode Features and Functions
MODE OR
FEATURE
Analyzer
Configuration
Auto Cal Feature
Internal Data
Acquisition (DAS)
Analog Output
Reporting Range
Configuration
Calibration
Password Security
Internal Clock
Configuration
Advanced SETUP
Features
Table 4-5: Secondary Setup Mode Features and Functions
MODE OR FEATURE
External Communication
Channel Configuration
System Status Variables
System Diagnostic Features
CO Concentration Alarms
2
Press ENTR to accept/apply changes made to a variable.
Press EXIT to ignore the change(s). (There will be an audible alert that the change has been lost).
07272B DCN6552
The SETUP mode contains a variety of choices that are used to configure the
analyzer's hardware and software features, perform diagnostic procedures, gather
information on the instruments performance and configure or access data from
the internal data acquisition system (DAS). For a visual representation of the
software menu trees, refer to Appendix A. The areas access under the Setup mode
are presented in Table 4-4 and Table 4-5.
TOUCHSCREEN
BUTTON
CFG
ACAL
DAS
RNGE
PASS
CLK
MORE
TOUCHSCREEN
BUTTON
COMM
VARS
DIAG
ALRM
DESCRIPTION
Lists key hardware and software configuration information
Used to set up and operate the AutoCal feature.
Only appears if the analyzer has one of the internal valve
options installed
Used to set up the DAS system and view recorded data
Used to configure the output signals generated by the
instruments Analog outputs.
Turns the calibration password feature ON/OFF
Used to Set or adjust the instrument's internal clock
This button accesses the instruments secondary setup menu
Used to set up and operate the analyzer's various
external I/O channels including RS-232; RS-485,
modem communication and/or Ethernet access.
Used to view various variables related to the
instruments current operational status
Used to access a variety of functions that are used to
configure, test or diagnose problems with a variety of
the analyzer's basic systems
Used to activate the analyzer's two gas concentration
status alarms and set the alarm limits
NOTE
Operating Instructions
DESCRIPTION
73