Epa Designation; Safety; Emc - Teledyne T200 User Manual

PARAMETER
Standard I/O
Optional I/O
Dimensions H x W x D
Weight
Operating Temperature Range
Humidity Range
Environmental Conditions
1 As defined by the US EPA.
2 Defined as twice the zero noise level by the US EPA.
All specifications are based on constant conditions.

EPA DESIGNATION

Teledyne API's Model T200 nitrogen oxides analyzer is officially designated as US EPA
Federal Reference Method (FRM), Designation Number RFNA-1194-099. The official
List of Designated Reference and Equivalent Methods is published in the U.S. Federal
Register
– http://www3.epa.gov/ttn/amtic/criteria.html, and specifies the instrument's settings
and configurations.

SAFETY

IEC/EN 61010-1:2010 (3
measurement, control, and laboratory use.
CE: 2006/95/EC, Low-Voltage Directive

EMC

IEC/EN 61326-1, Class A Emissions/Industrial Immunity
FCC 47 CFR Part 15B, Class A Emissions
CE: 2004/108/EC, Electromagnetic Compatibility Directive
16 Teledyne API T200 NO/NO
1 Ethernet: 10/100Base-T
2 RS-232 (300 – 115,200 baud)
2 USB device ports
8 opto-isolated digital status outputs (7 defined, 1 spare)
6 opto-isolated digital control inputs (4 defined, 2 spare)
4 analog outputs
1 USB com port
1 RS485
8 analog inputs (0-10V, 12-bit)
4 digital alarm outputs
Multidrop RS232
3 4-20mA current outputs
7" x 17" x 23.5" (178mm x 432 mm x 597 mm)
Analyzer: 40 lbs (18 kg)
External Pump Pack: 15 lbs (7 kg)
5 - 40 °C (with US EPA approval)
0-95% RH non-condensing
Installation Category (Over voltage Category) II Pollution Degree 2
Intended for Indoor Use Only at Altitudes ≤ 2000m
Edition), Safety requirements for electrical equipment for
rd
/NO Analyzer with NumaView™ Software
2 x
SPECIFICATION
083730200A DCN7962