Current Loop Analog Outputs (Option 41); Figure 5-1: Current Loop Option Installed - Teledyne 400E Instruction Manual

Optional Hardware and Software

5.2. Current Loop Analog Outputs (Option 41)

This option adds isolated, voltage-to-current conversion circuitry to the analyzer's
Analog Outputs enabling them to produce current loop signals. This option may be
ordered separately for Analog Outputs A1 and A2. It can be installed at the factory
or added later. Call the factory for price and availability.
The Current Loop Option can be configured for any output range between 0 and
20mA DC. Most current loop applications require either 2-20 mA or 4-20 mA spans.
Information on calibrating or adjusting these outputs can be found in
Section 6.7.3.3.
48

Figure 5-1: Current Loop Option Installed

Model 400E Ozone Analyzer
Instruction Manual
Current Loop Option
Installed on Analog
Output A2
P/N 04316 Rev: B