Table 5-6: Analog Output Current Loop Range - Teledyne t100 Operation Manual

Teledyne API - T100 UV Fluorescence SO
06807F DCN7335
Analyzer
2
The following DC current output limits apply to the current loop modules:

Table 5-6: Analog Output Current Loop Range

RANGE
0-20 mA
These are the physical limits of the current loop modules, typical applications use 2-20 or 4-20
mA for the lower and upper limits. Please specify desired range when ordering this option.
The default offset for all ranges is 0 mA.
A1
+ - +
Refer to Figure 3-4 for the location of the analog output connector on the instrument's
rear panel and Table 3-6 for pin assignments.
MINIMUM OUTPUT
0 mA
ANALOG OUT
A2 A3 A4
- + - +
MAXIMUM OUTPUT
20 mA
-
SETUP Menu
107