Operating areas and operating modes
5.3 Program Manager operating area
The cursor is placed on the main program block of the interrupt point.
The "Find" softkey provides the functions "Find line", "Find text" etc.
Use this softkey to correct a fault program passage. Any changes will be stored immediately.
5.3
Program Manager operating area
Functionality
Within the control system, the program manager operating area is the management area for
workpiece programs. In this area, programs can be created, openend for modification, se-
lected for execution, copied, and inserted.
Operating sequence
Press the <Program Manager> key to open the program directory.
Figure 5-10
Use the cursor keys to navigate in the program directory. To find program names quickly,
simply type the initial letter of the program name. The control system will automatically posi-
tion the cursor on a program with matching characters.
5-14
Program manager start screen
Programming and Operating manual, 06/2006, 6FC5398-4CP10-0BA0
Grinding