Mirroring - Siemens SINUMERIK 828D Operating Manual

Programming technological functions (cycles)
8.5 Further cycles and functions ShopMill
8.5.5

Mirroring

Furthermore, you can mirror all axes. Enter the axis to be mirrored in each case.
Note
Travel direction of the milling cutter
Note that with mirroring, the travel direction of the cutting tool (conventional/climbing) is also
mirrored.
New mirroring
Parameter
Mirroring
X
Y
Z
320
Description
New
•
New mirroring
Additive
•
Additive mirroring
Mirroring of the X axis, on/off
Mirroring of the Y axis, on/off
Mirroring of the Z axis, on/off
Additive mirroring
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
Unit
HMI sl Milling