Calling Technology Functions; Hiding Cycle Parameters; Setting Data For Cycles; Checking Cycle Parameters - Siemens SINUMERIK 828D Operating Manual

Creating G code program

6.9 Calling technology functions

6.9 Calling technology functions
6.9.1

Hiding cycle parameters

The documentation describes all the possible input parameters for each cycle. Depending on
the settings of the machine manufacturer, certain parameters can be hidden in the screens,
i.e. not displayed. These are then generated with the appropriate default values when the
cycles are called.
For additional information, please refer to the following documentation:
HMI sl / SINUMERIK 840D sl Commissioning Manual
Cycle support
Example
6.9.2

Setting data for cycles

Cycle functions can be influenced and configured using machine and setting data.
For additional information, please refer to the following documentation:
HMI sl / SINUMERIK 840D sl Commissioning Manual
6.9.3

Checking cycle parameters

The entered parameters are already checked during the program creation in order to avoid
faulty entries.
If a parameter is assigned an illegal value, this is indicated in the input screen and is
designated as follows:
182
1. Use the softkeys to select whether you want support for programming
contours, drilling or milling cycles.
2. Select the desired cycle via the softkey.
3. Enter the parameters and press the "Accept" key.
The cycle is transferred to the editor as G code.
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling