Mbtk_Lr Make - Busy Of Trunk – Logical Route Number - NEC Univerge SV8500 Operation And Maintenance Manual

MBTK_LR: Make - Busy of Trunk – Logical Route Number
1. Functional Outline
This command is used to assign the IDLE/BUSY status of trunks. Route number of the MBTK command can
be assigned by using logical route number.
When logging in to the Network Control Node (NCN), the data of other Local Node (LN) can be changed.
Note:
If logging in to a LN, only the DM of self-node can be changed by this command.
2. Parameters
Input Data
LGRT:
TK:
MB:
Prior to this command, a logical route number must be allocated to the route number by the ALRTN
Note 1:
command.
Note 2: For a Business system, the data is valid for the ACIS/CCIS line (TCL=4, 5, 7). For a Hotel system, the
data is invalid.
Output Data
FPC:
RT:
STATUS:
Logical route number [1-899]
Trunk Number [1-255]
Make-Busy Information [0-2]
0=Make Idle
1=Make Busy (Outgoing)
2=Make Busy (Bothway)
Fusion Point Code [1-253]
Route Number
Make Busy Status for MB=2
Self trunk MB
Other trunk MB
Both trunk MB
Self trunk MB ready
Both trunk MB ready
CHAPTER 7
Note 1
Note 2
– 888 –
Maintenance Commands