Mbtc_Lr Make-Busy Of Trunk-Continuous – Logical Route Number - NEC Univerge SV8500 Operation And Maintenance Manual

MBTC_LR: Make-Busy of Trunk-Continuous – Logical Route Number
1. Functional Outline
This command is used to assign the IDLE/BUSY status of trunks. By using this command, multiple trunks can
be placed into IDLE/BUSY state simultaneously per a logical route designated in LGRT parameter. Route
number of the MBTC command can be assigned by using logical route.
When logging in to the Network Control Node (NCN), the data of other Local Node (LN) can be changed.
Note:
If logging in to a LN, only the DM of self-node can be changed by this command.
2. Parameters
Input Data
LGRT:
TK:
MB:
Prior to this command, logical route number must be allocated by using the ALRTN command.
Note 1:
The status of plural trunks can be changed simultaneously, according to the range of trunk number as-
Note 2:
signed and per a logical route.
Output Data
FPC:
RT:
Logical route number allocated to the Route Number. Note 1
Trunk Number
START
END
Make-Busy Information [0-2]
0=Make Idle
1=Make Busy (Outgoing)
2=Make Busy (Bothway)
Fusion Point Code [1-253]
Route Number
CHAPTER 7
– 886 –
Maintenance Commands
Note 2