Dntel Display Of Telephone Number From Lens For Ndm - NEC Univerge SV8500 Operation And Maintenance Manual

DNTEL: Display of Telephone Number from LENS for NDM
1. Functional Outline
This command, available at Network Control Node (NCN) only, is used to display the Telephone Number or
other station data by designating a specific FPC and LEN.
2. Parameters
Input Data
FPC:
LENS:
Output Data
UGN (NDM):
TELN (NDM):
NID:
TN:
STN:
TEC:
RSC:
SFC:
UGN (LDM):
TELN (LDM):
Network ID (NID) is allocated automatically when the Module Group/Unit data is assigned by the
Note:
AFMU command. For detailed information, refer to the SV8500 FCCS Network System Manual.
Fusion Point Code [1-253]
Line Equipment Number [six digits]
User Group Number for NDM
Telephone Number for NDM [maximum 16 digits]
Network ID
Note
Tenant Number
Station Number [maximum six digits]
Telephone Equipment Number [1-31]
Route Restriction Class [0-15]
Service Feature Class [0-15]
User Group Number for LDM
Telephone Number for LDM
CHAPTER 7
– 821 –
Maintenance Commands