NEC Univerge SV8500 Operation And Maintenance Manual page 908

[Output Data]
System-0 operating status
System-1 operating status
System-Act IP address
System-0 IP address
System-1 IP address
Subnet Mask (default: 255.255.0.0)
Information of LAN2 will be displayed.
Note:
The color for the operating status means as shown below.
Note 1:
COLOR
When the IP address of MGC is not assigned by the ADTM command or assigned to 0.0.0.0, the default
Note 2:
data is indicated as follows.
SP/LP LP Number Default IP Address (System-0) Default IP Address (System-1)
SP
LP
LP
LP
LP
LP
LP
LP
LP
In single configuration, the blank is indicated.
Note 3:
• Buttons
Note 1
Note 1
Note 2
Note 2 Note 3
Note 2 Note 3
Note 2
Green Operating normal (ACT)
Yellow Operating normal (STBY)
Red
Gray
- 172. 16. 253. 0
0 172. 16. 253. 30
4 172. 16. 253. 38
8 172. 16. 253. 40
12 172. 16. 253. 48
16 172. 16. 253. 50
20 172. 16. 253. 58
24 172. 16. 253. 60
28 172. 16. 253. 68
CHAPTER 7
STATUS
Stop
Not mounted
– 861 –
Maintenance Commands
ping
Available
Available
Not available
Not available
172. 16. 253. 1
172. 16. 253. 31
172. 16. 253. 39
172. 16. 253. 41
172. 16. 253. 49
172. 16. 253. 51
172. 16. 253. 59
172. 16. 253. 61
172. 16. 253. 69