NEC Univerge SV8500 Operation And Maintenance Manual page 841

LP No.:
Drive Select:
File Name:
Output data
CNT (Count No.)
File Name
Date
Size
Buttons
Get:
Del.:
Exit:
35 - SIP Terminal Call Transfer
36 - SPD Name Data
37 - Mobility Access Data
38 - Day/Night Data
39 - Local Phone book Data
40 - Soft Switch Data
Designate the LP number. (Required when 12, 13, 18, 19, 23, 26, 27, 28 or 37 is selected
in the Data parameter.)
Designate the Drive of HDD.
•When 11 - 19, 22, 23, 26 - 29, 32 - 40 is selected in the Data parameter:
Drive B
Drive C
After assigning the parameters above and then pressing the Get button, the related file
names are listed in the display field at the bottom part of the command screen. By
double-clicking any of the file names, the name is listed in this parameter.
Display the related Program/Office Data file information.
Delete the Program/Office Data file specified in the File Name parameter.
Exit this command.
CHAPTER 7
– 794 –
Maintenance Commands