Dtf601 Display Of Connection Route Peg Count Data - NEC Univerge SV8500 Operation And Maintenance Manual

DTF601: Display of Connection Route Peg Count Data
1. Functional Outline
This command is used to display the result of traffic measurement data for TYPE=18 (Connection Route Peg
Count) assigned by the ATRF command.
2. Parameters
Traffic Data 1:
Traffic Data 2:
Traffic Data 3:
Traffic Data 5:
Traffic Data 6:
Traffic Data 7:
Traffic Data 8:
Terminal Traffic-DTF101
Route Traffic-DTF102
Station Peg Count-DTF103
Attendant Peg Count-DTF104
Route Peg Count-DTF105
Service Peg Count-DTF201
UCD Route Peg Count-DTF301
UCD Group Peg Count-DTF302
UCD Station Peg Count-DTF303
Attendant Answer Peg Count-DTF501
Connection Route Peg Count-DTF601
Connection Route Traffic-DTF602
IP Service Peg Count - DTF701
IP Service Traffic - DTF702
SIP Service Peg Count - DTF801
System Entire Peg Count
Each Server Peg Count
CHAPTER 7
– 841 –
Maintenance Commands