Dstn Display Of Station Data - NEC Univerge SV8500 Operation And Maintenance Manual

DSTN: Display of Station Data
1. Functional Outline
This command is used to display the registered Station Data corresponding to the designated Tenant and Station
Number. In addition, the information of Hot Line, Dterm Key Layout, Hunting, and Call Pickup, etc., can also
be displayed as the data related to the designated stations.
2. Parameters
Input Data
TN:
STN:
Buttons
For display data selection
SHP:
KYD:
CPG:
CPE:
PHN:
SHC:
SHU:
HLS:
Note: When the designated station has any of the above listed data, the corresponding button(s) can be
selected. If the data is necessary, click the button(s).
For execution order
Get:
Close:
Output Data (by Parameters)
ETN:
Tenant Number
Station Number [0-9, #, * (maximum six digits)]
Station Hunting Group-Pilot
Key Data for Dterm
Call Pickup Group
Call Pickup Expand Group
Phantom Station Number
Station Hunting-Circular
Station Hunting-UCD
Hot Line Station
View the display data.
Exit this command.
Effective Tenant Number
CHAPTER 7
Note
Note
Note
Note
Note
Note
Note
Note
– 827 –
Maintenance Commands