CPCP: Control of PC Port
1. Functional Outline
This command is used when the maintenance personnel disconnects/connects the PC port of DtermIP from/to
the network.
2. Parameters
Input Data
<For the data readout>
Kind of Specification:
All Data: Specifies all the DtermIP's PC ports.
IP Address Specification:
STN Specification:
TELN (NDM) Specification:
TELN (LDM) Specification:
IP Address START/END: Specify the range of IP addresses (0.0.0.1 - 255.255.255.254). This parameter
TN START/END:
STN START/END:
UGN START/END:
TELN START/END:
Select one of the following items:
Specifies the IP address of DtermIP that has been completed the
Registration process.
Specifies the Tenant Number and Station Number.
Specifies the UGN and Telephone Number (NDM).
Specifies the UGN and Telephone Number (LDM).
is valid when Kind of Specification = "IP Address Specification".
Specify the range of IP addresses (0.0.0.1 - 255.255.255.254). This parameter
is valid when Kind of Specification = "STN Specification".
Specify the range of Station Numbers (Up to six digits (0-9, *, #)).
This parameter is valid when Kind of Specification = "STN Specification".
Specify the range of User Group Numbers (1-255). This parameter is valid
when Kind of Specification = "TELN (NDM) Specification" or "TELN (LDM)
Specification".
Specify the range of Telephone Numbers (Up to 16 digits (0-9, *, #)).
This parameter is valid when Kind of Specification = "TELN (NDM)
Specification" or "TELN (LDM) Specification".
– 764 –
CHAPTER 7
Maintenance Commands