Initialization By Pcpro (Sinz) - NEC Univerge SV8500 Operation And Maintenance Manual

The relationship of operation types and Initialization types is as follows.
Relationship between Initialization Types and Available Operations
Initialization Type
Non Load Initial
Office Data Load Initial
Office Data Load & Program Load Initial
Office Data Load & Program Load (& OS Load) Initial
CF Card
Program
(Main Memory)
Office Data

3.2 Initialization by PCPro (SINZ)

All initialization types shown below are available.
• Non Load Initial
• Office Data Load Initial
• Office Data Load & Program Load Initial
• Office Data Load & Program Load (& OS Load) Initial
Use shutdown option on SINZ command.
Note:
STEP 1 Execute SINZ from the PCPro.
STEP 2 Select an appropriate initialization type, and then click "Execute" button.
• Initialization starts.
• PCPro is automatically placed in logout state.
Figure 2-2 Office Data Load and Program Load
- Basic Software
- Service Software
- IMAT Software
- TCP/IP Software
- Data Memory
- Call Forwarding Data
- Speed Calling Data
- Name Display Data
etc.
CHAPTER 2
Available Operations
PCPro PCPro INIT key Operation
(SINZ) Tools
X -
X -
X -
X X
Program Loading
Office Data Loading
Note
– 48 –
Operations of SV8500 Server
X: Available -: Not Available
Tuning Off/On
(EMA card)
X
-
-
-
MEM
- Program
- Office Data
Initialization
-
-
-
X